Paladin offers new series of construction chemicals for application in dry and under water crack injection to avoid threat to the durability and unacceptable leaks. Injection should not be used for cracks that are the result of corrosion of reinforcement.
Cleaned surface of the concrete alongside of crack is injected under pressure either into inlet ports that have been stuck to the concrete surface over the crack or through holes drilled to intersect the crack. Paladin product provide fast cure, workable pot life, good adhesion, and water resistance when cured with epoxy resin.
Use of Paladin’s diluents with epoxy helps to achieve low mixing viscosity, good flow in crack, solvent free system along with increases in pot life without adversely affecting final performance properties.
|Product Name||COLOR GARDNER||SOLIDS %||*VISCOSITY||*MIX VISCOSITY @ 25°C||AHEW||CHEMISTRY||RECOMMENDED APPLICATION*||DOCUMENTS|
|PCC - 9001B||8||Solvent free||350||1900||50||Construction Chemicals Hardener Systems||Crack injection formulations for Underwater, damp or wet concrete or masonry||TDS & SDS|
|PCC - 9002B||12||Solvent free||300||2050||50||Construction Chemicals Hardener Systems||Crack injection formulation for dry concrete or masonry, Epoxy mortars, adhesives and grouts||TDS & SDS|
|PPA - 7209 LITE||10||Solvent free||550||2300||95||Construction Chemicals Phenalkamines||Crack injection formulations for Underwater, damp or wet concrete or masonry||TDS & SDS|
|PPA - 7558||16||Solvent free||1250||2650||95||Construction Chemicals Phenalkamines||Crack injection formulation for dry concrete or masonry, Epoxy mortars, adhesives and grouts||TDS & SDS|
*VISCOSITY@ 25°C (cps)
*MIX VISCOSITY @25°C WITH LIQUID EPOXY RESIN-190 (in Cps)