Products
 
 
To view the PDF document you require  Adobe® Reader. To download the reader click here
Hardener
 
PPA - 7041 PHENALKAMINE EPOXY HARDENER
Download (Size : 526 KB)
Phenalkamine PPA - 7041 is Mannich base, a reaction product of distilled cashew nutshell liquid & polyamine.
 
Chemical Structure :
Features :
  • Excellent rapid cure even at low temperatures
  • Good chemical, solvent & water resistance
  • Very good compatibility with
    I) Epoxy resin based on bis-phenol A
    ii) Epoxy resin based on bis-phenol F
    iii) Epoxy resin based on phenolic novolacs
  • Non-critical mixing ratio
  • Excellent curing under humid as well as damp conditions
  • Good adhesion to mechanically cleaned surfaces
  • Superior corrosion resistance
  • Very good flexibility
  • Workable pot life
Applications :
  • Medium to high solid coatings
  • Flooring & Construction
  • Marine & Industrial maintenance coatings
  • Tank linings
  • Adhesives
  • Surface tolerant primers for metallic substrates
Typical Properties :
Sr. No.
Property Unit Specification
1 Appearance Visual Reddish Brown Viscous Liquid
2 Colour Gardner 17 max
3 N.V.M % Solvent free
4 Amine Value mg KOH / g 290 - 330
5 Viscosity @25° C cPs 20000 - 50000
6 Density @25° C gm/cm3 0.97 - 0.99
7 Flash point (Closed cup) °C / °F 63 / 145
8 AHEW g / eq. 130
9 Recommended PHR (EEW –190) ---- 65 – 75
Curing Properties :
Formulation :    
Liquid epoxy resin (EEW - 190) 100 100
Paladin PPA - 7041 65 75
Optimum curing schedule 7 days at 25° C
Gel time (100g @ 25° C) mixing 80 min 70 min
B.K. Drying Recorder, set time, (200 microns) 8 mil
(Liquid Epoxy resin EEW - 190)
@ 25° C 8 - 10 hrs
@ 5° C 20 - 22 hrs
@ 0° C 38 - 40 hrs
Storage & Stability :
Hardener PPA - 7041 should be stored in a cool dry place at 18 - 25° C in the sealed containers to achieve shelf life of minimum one year. Product can react with moisture & carbon dioxide in the air. This may result in increased viscosity & reduced activity.
Handling & Precaution :
May be harmful if ingested or absorbed through the skin & can cause sensitization. Will cause severe inflammation in contact with eye & skin. Wash thoroughly after handling. Adequate ventilation is essential during application. Containers should be tightly closed when not in use or during transportation. Do not inhale mist or vapours. It is recommended to use gloves, safety glasses & protective clothing for safe handling.
First AID :
In case of
Inhalation : Remove to fresh air & give oxygen if breathing is difficult
Ingestion : Give plenty of water. Do not induce vomiting. Contact a physician
Contact with Eyes : Flush eyes with plenty of clean water for at least 15 minutes
Contact with skin : Immediately wash with mild soap & water
 
© Paladin Paints & Chemicals Pvt. Ltd. 2008 All Rights Reserved.