Products
 
 
To view the PDF document you require  Adobe® Reader. To download the reader click here
Amine Adduct
 
PPA 7077 X 80 PHENALKAMINE EPOXY HARDENER
Download (Size : 657 KB)
Phenalkamine PPA – 7077 X 80 is Mannich base, a reaction product of distilled cashew nutshell liquid, phenol & polyamine. It is a low viscosity, fast drying curing agent. In general, it shows ability to resist moisture, while curing & exhibits rapid cure, even at low temperatures, similar to other phenalkamines. Epoxy systems based on PPA – 7077 X 80 shows excellent adhesion on difficult surfaces (e.g. galvanize, zinc rich epoxy, zinc silicate etc.)
 
Chemical Structure :
Features :
  • Low viscosity
  • Solvent free
  • Excellent rapid cure even at low temperatures & high humidity
  • Good chemical, solvent & water resistance
  • Very good compatibility with
    I) Epoxy resin based on bisphenol A
    ii) Epoxy resin based on bisphenol F
    iii) Epoxy resin based on phenolic novolacs
  • Non critical mixing ratio
  • Excellent curing (blush free) under humid as well as damp conditions
  • Good adhesion to mechanically cleaned surfaces
  • Superior corrosion resistance
  • Very good flexibility
  • Workable pot life at lower temperatures
Applications :
  • Medium to high solid coatings
  • Flooring & construction
  • Marine & industrial maintenance coatings
  • Tank linings
  • Adhesives
  • Surface tolerant primers for metallic substrates
 
Typical Properties :
Sr. No.
Property Unit Specification
1 Appearance Visual Light Brown Viscous Liquid
2 Colour Gardner 16 max
3 N.V.M % 78 – 82
4 Amine Value mg KOH / g 200 – 240
5 Viscosity  @25° C cPs 1000 – 3000
6 Density @25° C -- 0.97 – 0.99
7 Flash Point (Closed Cup) °C / °F 32 / 90
8 AHEW g / eq. 190
9 Recommended PHR (Liquid Epoxy Resin EEW -190) ---- 100
 
Curing Properties :
Formulation :  
Liquid Epoxy Resin (EEW - 190) 100
Paladin PPA 7077 X 80 100
Optimum Curing Schedule 7 days at 25 C in Minutes
Gel Time ( 100g @ 25° C ) Mixing 50 min
B.K Drying Recorder, set time, ( 200 microns ) 8 mil
(Liquid Epoxy Resin EEW - 190)
@ 25° C 2 – 3 hrs
@ 5° C 9 – 11 hrs
Storage & Stability :
Hardener PPA – 7077 X 80 should be stored in a cool dry place at 18 - 25 ° C in the sealed containers to achieve shelf life of minimum one year. Product can react with moisture & carbon dioxide in the air. This may result in increased viscosity & reduced activity.
Handling & Precaution :
May be harmful if ingested or absorbed through the skin & can cause sensitization. Will cause severe inflammation in contact with eye & skin. Wash thoroughly after handling. Adequate ventilation is essential during application. Containers should be tightly closed when not in use or during transportation. Do not inhale mist or vapors. It is recommended to use gloves, safety glasses & protective clothing for safe handling.
First AID :
In case of
Inhalation : Remove to fresh air & give oxygen if breathing is difficult
Ingestion : Give plenty of water. Do not induce vomiting. Contact a physician
Contact with Eyes : Flush eyes with plenty of clean water for at least 15 minutes
Contact with skin : Immediately wash with mild soap & water
 
© Paladin Paints & Chemicals Pvt. Ltd. 2008 All Rights Reserved.